MRV Communications AE182FCAHA Drill User Manual


 
AUTO, FAN operation
Operating instructions
2
1
3
4
Unit start
Press the "ON/OFF" key to turn on the unit.
The LCD on the remote controller displays the previous
operating conditions (excluding previous timer, sleep and
louver conditions).
The remote controller operation indicator turns on.
AM
R
2
1
4
3
Select operation mode
Press the "MODE" key to alter the working mode. Each
pressing will change the operation mode in the following
sequence:
AUTO COOL DRY FAN HEAT
The air conditioner will operate with the displayed running
mode.
Select AUTO or FAN operation mode,
the display will stop at " "AUTO, or" " FAN
LOW MID HIGH AUTO
Fan speed adjustment
Press the "FAN SPEED" key to change the fan speed. Every
pressing will change the fan speed in the following sequence:
The air conditioner will run at the displayed fan speed.
Note: AUTO fan speed is unavailable in FAN operation mode.
L L M L M H L M H
AUTO
Unit stop
The remote controller LCD displays only the clock and room
temperature.
Press the "ON/OFF" key to turn off the unit.
The remote controller possesses a memory function which could remember the setting conditions
in each operation mode. Upon next time of operation, you need only to select the operation mode
and the air conditioner will automatically operate with the previous settings without further setting.
Hints:
LOW MIN HIGH
AUTO
ROOM TEMP
TIMER
SET
CLOCK
TIME
SLEEP
TEMP
SWING
FAN
SPEED
MODE
(Except for the timer, sleep and louver conditions).
8