MRV Communications AE182FCAHA Drill User Manual


 
12:00
12:00
12:00
12:00
*
*
R
1
4
2
6
3
5
TIMER ON-OFF operation
Operating instructions
1. After unit starts, select your desired operation mode.
The operation indicator turns on and the operation mode is
displayed on the LCD screen.
2. Timer mode selection
AM
TIMER ON TIMER OFF TIMER ON BLANK
TIMER OFF
AM
TIMER ON TIMER OFF TIMER ON-OFF
AM
AM
Select TIMER ON-OFF mode.TIMER "ON" flashes now.
3. Time setting for TIMER ON
Press "TIMER SETTING" step keys.
Every time pressing the " " key, time setting will increment by 10 min, if kept pressed, it will increase
rapidly.
Every time pressing the " " key, time setting will decrement by 10 min, if kept pressed, it will decreases
rapidly.
The remote controller LCD displays the time setting which could be freely adjusted within 24 hours.
4. Time confirming for TIMER ON
After time setting, press the "SET" key to confirm the time.
"TIMER ON" doesnt flash any longer while "TIMER OFF" starts to flash.
Time displayed: Unit starts at x hour x min.
5. Time setting for TIMER OFF
Press "TIMER SETTING" step keys, then follow the same procedure in Time setting for TIMER "ON".
6. Time confirming for TIMER OFF
After time setting, press "SET " key to confirm.
TIMER "OFF " does not flash any longer.
Time displayed: Unit stops at x hour x min.
To cancel TIMER mode
l Just press "TIMER" key several times until TIMER mode indication disappears.
l According to the time setting sequence of TIMER ON and TIMER OFF, either Start-
Stop or Stop-Start can be achieved.
AM
AM
AM
TIMER ON
TIMER OFF
LOW MID HIGH
AUTO
ROOM TEMP
TIMER
SET
CLOCK
TIME
SLEEP
TEMP
SWING
FAN
SPEED
MODE
11