Filter
Top Products
28
Installating the Reciever and MP3 equipment MP3
Connecting wiring method of receiver :
Refer the indoor unit wiring diagram .
safety cautions see the electrical wiring part .
Installation Procedure
Installation of receive display
Because of the temperature sensitive device, do not install the receive display at straight
sunlight place, either in front of air outlet grill, for it is effected greatly from cool air and
heat air, the receive display is at least 20mm distance to the air outlet grill.
Since there is light sensitive device which receives wireless remote signal, so do not installed
behind the window curtain or other obstacles, in order not to obstruct the signal.
Must fix the remote control wire far from strong electricity (such as the wiring of electric
light, air conditioner, etc.) and weak electricity (such as the wiring of telephone, interphone,
etc.).
2.Place the panel onto the fixed frame, pay
attention that the four claws must be placed
into the corresponding four poles on the frame
1.Fix the receive display with screws
on the selected place