Filter
Top Products
PAGE 20 — HS81 CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #4 (09/12/05)
HS81 CUT-OFF SAW — ASSEMBLY INSTRUCTIONS
Reverse the
cutting arm
180 degrees as shown in the Figure
19, and re-tension the V-belt by turning the
belt tensioning
cam
O
. The V-belt should remain in tension.
Fully tighten the three nuts and washers
N
that lock the V-belt
into the proper tensioning position.
Figure 19. Reversing the Cutting Arm
Figure 20. Re-attaching Cover Guard
Re-attach the
cover guard
K
with the 2 cap screws
J
,
and reconnect the
guard adjustment knob
I
.