Filter
Top Products
HTXD6i/STXD6i TROWEL • SETUP, ADJUSTMENTS AND CALIBRATIONS — REV. #1 (01/24/14) — PAGE 3
MACHINE INFORMATION AND MAINTENANCE LOG
Technician__________________________________e Date:___________________________
Machine Information
MODEL LH Motor Serial No.
Machine Serial No. RH Motor Serial No.
Engine Serial No. Program ID
Pump Serial No. Program Version
Inspection
Fuel Levels
ü
Leak Checks
ü
Engine Oil Engine
Coolant Coolant
Hydraulic Oil Hydraulics
Mechanical
ü
Functional Checks
ü
Grease Points Hour Meter
Stabilizer Rings Seat Switch
Hydraulics
Drift Test
Retardant Spray System Travel (Start/Stop)
Electrical
ü
Initial Height (LH/RH)
Cooling Fan Final Height (LH/RH)
Switches
Lights and Indicators
Machine Setup and Calibration Information
Hydraulic Pressure Settings
(Hydraulic Oil Temperature Below 125 °F)
Calibration
Point 1 Point 2
Charge Pressure (psi) Foot Pedal
Pitch Pressure (psi) Stroke Sensor
Steering Pressure (psi) Pitch Sensors
Blade Speed
Travel (LH)
Left (rpm) Travel (RH)
Right (rpm) Stops (LH)
Stops (RH)