Filter
Top Products
SFCS-16 OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 36
EXPLANATION OF CODE IN REMARKS COLUMN
The following section explains the different symbols and
remarks used in the Parts section of this manual. Use the
help numbers found on the back page of the manual if there
are any questions.
SAMPLE PARTS LIST
NO. PART NO. PART NAME QTY. REMARKS
1 12345 BOLT .....................1 .....INCLUDES ITEMS W/%
2% WASHER, 1/4 IN. ..........NOT SOLD SEPARATELY
2% 12347 WASHER, 3/8 IN. ..1 .....MQ-45T ONLY
3 12348 HOSE ..................A/R ...MAKE LOCALLY
4 12349 BEARING ..............1 .....S/N 2345B AND ABOVE
NO. Column
Unique Symbols — All items with same unique
symbol
(@, #, +, %, or >) in the number column belong to the
same assembly or kit, which is indicated by a note in the
“Remarks” column.
Duplicate Item Numbers — Duplicate numbers indicate
multiple part numbers, which are in effect for the same
general item, such as different size saw blade guards in
use or a part tha
t has been updated on newer versions
of the same machine.
PART NO. Column
Numbers Used — Part numbers can be indicated by a
number, a blank entry, or TBD.
TBD (To Be Determined) is generally used to show a
part that has not been assigned a formal part number
at the time of publication.
A blank entry generally indicates that the item is not sold
se
p
aratel
y
or is not sold b
y
Multi
q
ui
p
. Other entries will
NOTICE
The contents and part numbers listed in the parts
section are subject to change without notice. Multiquip
does not guarantee the availability of the parts listed.
NOTICE
When ordering a part that has more than one item
number listed, check the remarks column for help in
determining the proper part to order.
QTY. Column
Numbers Used — Item quantity can be indicated b
y
number, a blank entry, or A/R.
A/R (As Required) is generally used for hoses or ot
h
parts that are sold in bulk and cut to length.
A blank entry generally indicates that the item is not s
o
separately. Other entries will be clarifi ed in the “Remar
k
Column.
REMARKS Column
Some of the most common notes found in the “Remar
k
Column are listed below. Other additional notes need
e
to describe the item can also be shown.
Assembly/Kit — All items on the parts list with t
h
same unique symbol will be included when this item
purchased.
Indicated by:
“INCLUDES ITEMS W/(unique symbol)”
Serial Number Break — Used to list an effective ser
number range where a particular part is used.
Indicated by:
“S/N XXXXX AND BELOW”
“S/N XXXX AND ABOVE”
“S/N XXXX TO S/N XXX”
Specifi c Model Number Use — Indicates that the p
a
is used only with the specifi c model number or mo
d
number variant listed. It can also be used to show
part is NOT used on a specifi c model or model num
b
variant.
Indicated by:
“XXXXX ONLY”
“NOT USED ON XXXX”
“Make/Obtain Locally” — Indicates that the part c
a
be purchased at any hardware shop or made out
available items. Examples include ba ttery cables, shi
m
and certain washers and nuts.
“Not Sold Separately” — Indicates that an item can
n
be purchased as a separate item and is either part of
a
assembl
y
/kit that can be
p
urchased, or is not availa
b