Filter
Top Products
PAGE 14 — SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV. #1 (05/17/10)
MAJOR COMPONENTS
Figure 3 displays the location of the various operational control
features of the SP2S13H20A pavement saw. Features are
dependent on the specific model saw selected. The function of each
console component or indicator is explained below:
1. Handle Bars – Used to steer and push the SP2S13H20A
saw during cutting operations. The handle can be folded
down for transportation.
2. Forward/Reverse Speed Lever – Controls forward and
reverse speeds for self-propelled operation. Provides
positive neutral for engine start. ALWAYS place
transmission engage/disengage lever in the engage
position before setting speed lever.
3. Raise/Lower Crank Handle – Physically orients saw
(raises or lowers) depending on cranking direction (CW or
CCW). Turning the handle
clockwise
lowers the saw,
turning the saw counter-clockwise
raises the saw.
4. Transmission Engage/Disengage Lever – Forward
locking position engages transmission. Rear Locking
position disengages transmission from rear axle and
permits "free wheeling".
5. Water Tank – A 5-gallon capacity water tank provides water
for the saw blade during wet cutting applications.
Figure 3. SP2S13H20A Saw Major Components
6. Water ON/OFF Valve – ON position
opens
valve and
permits water to flow from source through saw water hose.
OFF position
closes
valve and halts the flow of water.
7. Hydraulic Drive Transmission - Controls the saw's
forward and reverse movement by using the
forward/
reverse speed lever
.
8. Saw Blade Guard –
Covers the saw blade during cutting
operations & allows water hoses to be connected to the
cover for wet cutting.
9. Belt Cover – Covers the drive shaft belt, engine pulley
and the hydraulic transmission belt.
10. Drive-Shaft Pulley Guard – Covers the drive shaft pulley.
11. Rear Wheels – Allows the saw to be rolled across ground.
The rear wheels are turned by the spline gears attached to
the hydraulic transmission system.
12. Pointer Arm – Front pointer wheel assists in straight
tracking. Lifts up for storage and pivots down for use.
13. Lifting Bale Kit –
Allows for easy lifting and transporting
the SP2S13H20A saw.