Filter
Top Products
PAGE 26 — SP2S13H20A SAW — OPERATION AND PARTS MANUAL — REV. #1 (05/17/10)
Stopping the Engine (13 HP Honda Engine)
SHUT-DOWN PROCEDURES
1. Place the
forward/reverse speed
lever
in the NEUTRAL position
(Self propelled models only).
NEVER stop the engine while the blade is in the cut, except for
extreme emergencies. A sudden stoppage of the engine at high
speed while in a cut could damage the blade and/or saw, and
may cause injury to the user or other in the operating area.
2. Place the
engine throttle lever
(Figure 30) in the SLOW
position, and listen for the engine speed to decrease.
Figure 29. Speed Lever
(Neutral Position)
Figure 30. Throttle Lever
3. Turn the console
engine ON/OFF switch
(Figure 31) to the
OFF position.
Figure 31. Engine ON/Off Switch (Off Position)
4.
Place the fuel valve lever (Figure 32) to the OFF position.
Figure 32. Fuel Valve Lever (Off Position)
Emergency Stop Procedure
1. Turn the console
engine ON/OFF switch
(Figure 31) to the
OFF position.
WARNINGWARNING
WARNINGWARNING
WARNING