Multiquip SP303516 Saw User Manual


 
MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAGE 24
MQ SP-3035 CONCRETE SAW
Removing the Blade Guard
During use, the Blade Guard can become tight on the tapered mounting tab. To loosen it, wiggle
the Rear Blade Guard Handle up and down, while lifting with the Top Handle.
Blade Guard Water Supply
Verify that the water hose on the saw is connected to the Blade Guard and that the water pipes are
pointed into both Blade Collars.

NOTE
Make sure that the outlets of the water tubes point toward the lower
portion of the blade collars, aimed at the delivery ports, for proper
water delivery to the blade.
Fig. 10 — Water Tubes and the Blade Collar
Blade Collar
Water Tube aimed at
groove in Blade Collar
Water Tube bracket