Filter
Top Products
MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAGE 58
MQ SP-3035 CONCRETE SAW
Drive Wheel Alignment
Below is the suggested technique for aligning the wheels. Distance X is the same on either side;
the Front Axle and Spindle must be at right angles to the frame edge. Distance A is 3/16” (.187”)
longer on the right side, so that the saw steers slightly left. Users may wish to alter the alignment
to fit a particular application.
Fig. 45 — Drive Wheel Alignment