Filter
Top Products
TP7X TILE SAW • OPERATION MANUAL — REV. #0 (03/04/11) — PAGE 9
SAFETY INFORMATION
ELECTRIC MOTOR SAFETY
NOTICE
Operate electric motor only at the specifi ed voltage
indicated on the nameplate.
DO NOT spray water onto electric motor.
ALWAYS disconnect AC power plug from power source
before moving saw, changing blade, or performing
maintenance.
ALWAYS make sure the ON/OFF switch
on the electric motor is in the OFF position
when not in use and before inserting the
saw’s power plug into an AC receptacle.
Power Cord/Cable Safety
DANGER
NEVER let power cords or cables lay in water.
NEVER use damaged or worn cables or cords when
connecting equipment to generator. Inspect for cuts in
the insulation.
NEVER grab or touch a live power
cord or cable with wet hands. The
possibility exists of electrical shock,
electrocution or death.
Make sure power cables are securely
connected. Incorrect connections may
cause electrical shock and damage to the
saw.
CAUTION
Ensure that cables and cords will not be tripped over or
trapped underneath the saw.
Never use the cable to pull out the plug from the power
source.
NOTICE
ALWAYS make certain that proper power or extension
cord has been selected for the job.
Protect the cable from heat, oil, and sharp edges.
LIFTING SAFETY
CAUTION
NEVER
allow any person or animal to stand underneath
the equipment while lifting.
Some saws are very heavy and awkward to move around.
Use proper heavy lifting procedures.
DO NOT lift machine to unnecessary heights.
NEVER lift the equipment while the motor is running.
TRANSPORTING SAFETY
NOTICE
ALWAYS shutdown motor before transporting.
ALWAYS tie down equipment during transport by
securing the equipment with rope.
Ensure that the diamond blade does not come into contact
with the ground or surface during transportation.
NEVER
transport the saw to or from the job site with the
blade mounted.
ENVIRONMENTAL SAFETY
NOTICE
Dispose of hazardous waste properly.
Examples of potentially hazardous waste
are used motor oil, fuel and fuel fi lters.
DO NOT use food or plastic containers to dispose of
hazardous waste.
DO NOT
pour waste, oil or fuel directly onto the ground,
down a drain or into any water source.