Filter
Top Products
www.norcold.com/cda 43N6XX/N8XX ModelsRefrigerator Service Manual
N64XIM/N84XIM (ice maker)
a. Reinstall the ice maker water valve.
b. Reconnect the ice maker water line.
c. Connect the brown and the white wires to the
water valve solenoid terminals.
10. Install the burner box.
11. Install the burner tube and burner assembly. Do not
overtighten fittings.
13. Install the gas valve and connect the burner tube
to the valve. Do not overtighten fittings.
14. Install the spark/sense electrode assembly. Set
electrode-to-burner air gap 1/8 to 3/16 inch.
15. Install the burner box cover.
16. Connect the AC heater wires to power board
terminals AC_HT -LO1 and AC _HT _HI.
3-way refrigerators (AC/LP/DC)
a. Install DC heater into tube.
b. Connect heater wires to terminals FLP_DC
HEAT and DC_HT_GND.
17. Reinstall the power board cover.
18. Connect the gas valve wires to the power board
terminals GV and GV_GND.
19. Plug the AC cord into the power board.
20. Connect the spark/sense electrode assembly to
the power board.
Figure 29. Condenser Angle and Retaining Screw.
Figure 30. Application of Sealant.
Foam plug step
1/2 in. bead
of sealant
High temp
evaporator
1/2 in. bead of
sealant
Low temp
evaporator
1/2 in. bead
of sealant
3
/
4
in.
to
1
1
/
4
in.
Condenser retaining screw