Filter
Top Products
3.2.9 Alarm 2 Menu
This unit is equipped with two physical outputs that can only be configured as
follows: Alarm 1 & Alarm 2, Alarm 1 & Output 2, Output 1 & Alarm 2, Output 1
& Output 2, Analog Out 1 & Alarm 2, Analog Out 1 & Output 2. Analog Out
available only if Analog Output Option board is factory installed.
Alarm must be DISABLED if Ramp is ENABLED.
Figure 3.7 Flow Chart for Alarm 2 Menu
ENTER ALARM 2 MENU:
Press
a
1) Press
a
, if necessary, until
CNFG
prompt appears.
Press
d
2) Display advances to
INPT
Input Menu.
Press
a
3)
Press
a
, if necessary, until display advances to
ALR2
Alarm 2
Menu.
Press
d
4) Display advances to Alarm 2
ENBL
Enable or
DSBL
Disable
Submenu.
33