Filter
Top Products
62
PART 5
FACTORY PRESET VALUES
Table 5.1 Factory preset value
MENU ITEMS FACTORY PRESET VALUES NOTES
Set Point 1 (SP1) 000.0
Set Point 2 (SP2) 000.0
Input:
Input Type (INPT) 0 TO 100 MV (0-0.1)
Ratiometric Operation (RTIO) Enable (ENBL)
Input/Reading
Resolution (RESO) Low (LO)
b
Button Peak (PEAK)
Reading Configuration (RDG):
Decimal Point (DEC.P) FFF.F
Known/Unknown Load (LOAD) Disable (DSBL)
Linearization Points (L.PNt) 0002 or NONE
Filter Value (FLTR) 0004
Input/Reading (IN.RD) 0-100 mV = 0-9999
Scale and Offset
Alarm 1 & 2
:
Alarm 1 (ALR1), Alarm 2 (ALR2) Disable (DSBL)
Absolute/Deviation (ABSO/DEV) Absolute (ABSO)
Latch/Unlatch (LTCH/UNLT) Unlatch (UNLT)
Contact Closure (CT.CL) Normally Open (N.O.)
Active (ACTV) Above (ABOV)
Alarm At Power On (A.P.ON) Disable (DSBL) Alarm 1 only
Alarm Low (ALR.L) -100.0
Alarm High (ALR.H) 400.0
Loop:
Loop Break Time (LOOP) Disable (DSBL)
Loop Value (B.TIM) 00:59
Setpoint Deviation (SP.dV) Disable (DSBL)
ANALOG OUTPUT (Retransmission):
Analog Output (ANLG) Enabled (ENBL)
Current/Voltage (CURR/VOLT) Voltage (VOLT)
Scale and Offset Reading: 0 - 999.9 cts, Output: 0 - 10 V
Output 1 & 2
:
Self (SELF) Disabled (DSBL) Output 1 only
% Low Value (%LO) 0000 Output 1 only
% High Value (%HI) 0099 Output 1 only
Control Type (CTRL) On/Off
Action Type (ACTN) Reverse (RVRS)
Dead Band (DEAD) 020.0