Filter
Top Products
— 13 —
V
. ACCESSORIES
Use only bits suitable for size of drill’s chuck.
Use Panasonic original Optional Keyless drill chuck (EY9X003E) and Quick change chuck
(EY9HX110E) for maximum performance.
VI
. SPECIFICATIONS
MAIN UNIT
KEYLESS DRILL CHUCK
BATTERY PACK
BATTERY CHARGER
Note: This chart may include models that are not available in your area.
Please refer to the catalogue.
CAUTION: This Panasonic Multi Drill & Driver is designed to use only battery pack type EY9230,
EY9136. Use with other battery pack type may damage the tool and the battery, and may
result in the risk of fire and personal injury.
Model EY6535
Drill driver Mode
Impact mode
(Caution: Do not use Keyless drill chuck for impact mode)
Maximun
recommen
ded
capacities
Drilling
Wood drilling ø 27 mm (1 - 1/16")
Not feasible
Metal drilling ø 13 mm (1/2")
Screw
driving
Machine screw M5 Not feasible
Wood screw ø 6.8 mm (17/64")
Tech screw ø
6 mm (15/64")
Coach screw (Lag bolt)
ø10 mm (3/8")
Bolt Fastening Not feasible
Standard Bolt: M12
High Tensile Bolt: M10
No load speed 0 - 650 /min (rpm) 0 - 2200 /min (rpm)
Max Torque 22.6 Nm (230 kgf-cm)
127.5 Nm (1300 kgf-cm)
at high tensile bolt fastening
Clutch Torque
Approx.
1.0 Nm (10 kgf-cm, 8.7 in-lbs.) -
5.4 Nm (55 kgf-cm, 47.7 in-lbs.)
-
Impact per minute
-
0 - 3300 /min (ipm)
Motor DC Motor 15.6V
Square drive 12.7 mm (1/2") square drive with ball detent
Weight (with battery pack) 2.2 kg ( 4.8 lbs.)
Overall length 216 mm ( 8 - 1/2")
Model EY9X003E
Chuck Capacity 1.6 mm - 13 mm (1/16" - 1/2")
Model EY9230
Storage battery Ni-MH Battery
Battery voltage 15.6V DC (1.2V x 13 cells)
Model EY0110
Electrical rating See the rating plate on the bottom of the charger.
Weight 0.78 kg, (1.72 lbs.)
Charging Time
7.2 V 9.6 V 12 V 15.6 V 18 V 24 V
1.2Ah
EY9065, EY9066 EY9080, EY9086 EY9001, EY9006
1.7Ah
EY9180, EY9182 EY9101
2.0Ah
EY9168 EY9106 EY9136 EY9117
3.0Ah
EY9200 EY9230 EY9210
3.5Ah
EY9201 EY9231 EY9251
20min.
25min.
30min. 30min. 60min.
45min. 90min.
55min. 65min.
EY6535(EU).book Page 13 Tuesday, March 1, 2005 9:36 AM