Filter
Top Products
SoundPoint IP 32x/33x User Guide
50
Your personal profile is no longer accessible, and the phone displays either the User Login screen for the
next user login, or the default phone profile for anonymous users.
Placing Calls from Phones that are in the Logged Out State
If a phone doesn’t require a user login, you can use the phone to place calls to any number, even though
the phone may be in the logged out state.
If a phone requires a user login, you may be able to place calls to authorized numbers when the phone is
in the logged out state. If your system administrator has set up emergency numbers on the phone, you
can place calls to the standard emergency number (for example, 911) and up to five other authorized
numbers. You won’t be able to call any other numbers until you log in to the phone.
To place a call to an authorized number from a phone in the logged out state:
1 Press the New Call soft key.
The Place an Authorized Call screen displays, as shown next.
2 Select the number you want to call, then press the Select soft key or the Dial key.
The call is placed.
Changing Your User Password
You can change your password from any phone that you’re logged in to.
Note: Changing the Default Password
By default, user passwords are factory preset to the numerals 123. Your administrator can change
this default password if needed. Polycom recommends that you change your password when you
first log in to a phone. Your system administrator manages your user ID, you cannot change it
yourself.
To change your user password:
1 Log in to any phone on your network.
2 From the idle screen, press the Menu key, then select Features > User Login > Change User Login
Password.