Powermatic 201HH Planer User Manual


 
6
Introduction
This manual is provided by WMH Tool Group, Inc., covering the safe operation and maintenance
procedures for a Powermatic Model 201 and 201HH Planer. This manual contains instructions on
installation, safety precautions, general operating procedures, maintenance instructions and parts
breakdown. This machine has been designed and constructed to provide years of trouble free operation if
used in accordance with instructions set forth in this manual. If there are any questions or comments,
please contact either your local supplier or WMH Tool Group. WMH Tool Group can also be reached at
our web site: www.wmhtoolgroup.com.
Specifications
Model Number.......................................................................201................................................... 201HH
Stock Number (7.5HP, 1Ph, 230V) ................................1791261.................................................1791267
Stock Number (7.5HP, 3Ph, 230V) ................................1791262.................................................1791268
Stock Number (7.5HP, 3Ph, 460V) ................................1791280.................................................1791269
Working Width (in.)..................................................................22.......................................................... 22
Maximum Depth of Cut (in.)..................................................3/16....................................................... 3/16
Minimum Thickness (in.).........................................................1/8......................................................... 1/8
Maximum Thickness (in.).....................................................9-3/4...................................................... 9-3/4
Segmented Infeed Roller Diameter (in.) .....................................3............................................................ 3
Steel Outfeed Roller Diameter (in.) ............................................3............................................................ 3
Feed Speeds (FPM) .................................................... 20 and 30...............................................20 and 30
Minimum Length Workpiece (in.)..............................................10.......................................................... 10
Cutterhead Style.............................................................. straight.................................................... helical
Cutterhead Diameter (in.) ....................................................3-1/4...................................................... 3-1/4
Number of Knives......................................................................4.............................150 four-sided inserts
Cutterhead Speed (RPM) ....................................................4800...................................................... 4800
Cuts per Minute................................................................19,200.........................................not applicable
Table Size (LxW)(in.)................................................. 31-1/2 x 24.............................................31-1/2 x 24
Table Support............................................................... 2-column................................................2-column
Dust Port Diameter (in.).............................................................5............................................................ 5
Dust Collection Minimum CFM Required................................900........................................................ 900
Shipping Weight, approximate (lbs.).....................................1430...................................................... 1430
Net Weight, approximate (lbs.).............................................1350...................................................... 1350
Overall Dimensions (LxWxH)(in.)..............................42 x 49 x 59...........................................42 x 49 x 59
The above specifications were current at the time this manual was published, but because of our policy of
continuous improvement, WMH Tool Group reserves the right to change specifications at any time and
without prior notice, without incurring obligations.