Powermatic 209HH Planer User Manual


 
8
Unpacking
Open shipping container and check for shipping
damage. Report any damage immediately to
your distributor and shipping agent. Do not
discard any shipping material until the Planer is
assembled and running properly.
Compare the contents of your container with the
following parts list to make sure all parts are
intact. Missing parts, if any, should be reported
to your distributor. Read the instruction manual
thoroughly for assembly, maintenance and
safety instructions.
Crate Contents (Figure 2):
Models 209 and 209HH:
1 Planer (not shown)
1 Dust Hood
2 Cast Iron Extension Tables
1 Handwheel
1 Handle
1 Low Speed Gear Kit (#6292822) containing:
1 50P Chain
1 12T Sprocket
3 Open-End Wrenches (8-10,12-14,17-19mm)
4 Hex Wrenches (3,4,5 and 6mm)
2 Hardware Bags*
(*Contents of hardware bags are drawn full
scale in Figure 3.)
1 Owner’s Manual (not shown)
1 Warranty Card (not shown)
Model 209 ONLY:
1 Knife Setting Gauge
Model 209HH ONLY:
1 1/4” Drive Screwdriver
1 T25 Torx Drive Socket Adaptor
1 Set of 10 Knife Inserts
Figure 4
Figure 2
Figure 3