Filter
Top Products
6
Introduction
This manual is provided by WMH Tool Group, Inc. covering the safe operation and maintenance
procedures for a Powermatic Model 64A 10” Tablesaw. This manual contains instructions on installation,
safety precautions, general operating procedures, maintenance instructions and parts breakdown. This
machine has been designed and constructed to provide years of trouble free operation if used in
accordance with instructions set forth in this manual. If there are any questions or comments, please
contact either your local supplier or WMH Tool Group. WMH Tool Group can also be reached at our web
site: www.wmhtoolgroup.com.
Specifications
Model Number.....................................................................................................................................64A
Stock Numbers:
1791227K............................................................. Model 64A with 30” Rails, 27” x 17” Extension Table
1791228K..............................................Model 64A with 50” Rails, 27” x 36” Extension Table and Legs
1791270K.............................. Model 64A with 30” Rails, 27” x 17” Extension Table, Legs, Rout-R-Lift®
1791271K.............................. Model 64A with 50” Rails, 27” x 36” Extension Table, Legs, Rout-R-Lift®
Blade Diameter (in.)............................................................................................................................... 10
Arbor Diameter (in.).............................................................................................................................. 5/8
Maximum Depth of Cut at 90 degrees (in.)......................................................................................... 3-1/8
Maximum Cut Depth @ 45 degrees (in.) ............................................................................................ 2-1/8
Maximum Rip to Right of Blade (in.).............................................................. 30” (50” with extension table)
Maximum Rip to Left of Blade (in.)......................................................................................................... 12
Table in Front of Saw Blade at Max. Cut (in.) ................................................................................... 11-1/2
Maximum Width of Dado (in.)............................................................................................................ 13/16
Maximum Diameter of Dado (in.) ....................................................................................................... 7-1/2
Table Height from Floor (in.).................................................................................................................. 35
Table Size with Extension (LxW)(in.)...............................................................................................40 x 27
Table Size without Extension (LxW)(in.)..........................................................................................20 x 27
The above specifications were current at the time this manual was published, but because of our policy of
continuous improvement, WMH Tool Group reserves the right to change specifications at any time and
without prior notice, without incurring obligations.