Filter
Top Products
6
Introduction
This manual is provided by WMH Tool Group, Inc., covering the safe operation and maintenance
procedures for a Model PF3-JR Stock Feeder. This manual contains instructions on installation, safety
precautions, general operating procedures, maintenance instructions and parts breakdown. This machine
has been designed and constructed to provide years of trouble free operation if used in accordance to
instructions set forth in this manual. If there are any questions or comments, please contact either your
local supplier or WMH Tool Group. WMH Tool Group can also be reached at our web site:
www.wmhtoolgroup.com.
Description
The PF3-JR Stock Feeder can be mounted to a table saw, shaper, jointer, etc., and will act as a “third
hand” for the operator to smoothly feed workpieces through the auxiliary machine. The Stock Feeder has
a continuous-duty motor and lubricated gearbox that transmit power through roller chain and sprockets to
the feed rollers, providing superior positive feeding for all types of materials. The stand is fully adjustable
with universal joints, and heavy locking mechanisms secure the feeder in horizontal, vertical or angled
positions. The roller system is “maintenance-friendly” allowing you to replace a single roller if necessary,
instead of a complete set.
Specifications
Model Number.............................................................................................................................. PF3-JR
Stock Number...............................................................................................................................1790818
Approx. Length, with arm fully extended and handle installed (in.).................................................... 27-1/2
Width (in.)........................................................................................................................................... 11.8
Approx. Height, with handle installed (in.) ........................................................................................ 23-1/4
Column Diameter (in.)........................................................................................................................... 1.6
Rollers......................................................................................................................... 3 (synthetic rubber)
Roller Size (Diameter x Length) (in.) .....................................................................................3-1/8 x 1-3/16
Motor...............................................................................................TEFC, 0.25HP, 1Ph only, 115V, 60Hz
Rotation.......................................................................................................................... Forward/Reverse
Number of Speeds................................................................................................................................... 4
Speed Range (FPM)................................................................................................................13/26/33/62
Distance between Rollers (center to center) (in.)......................................................................4.32 to 3.34
Swing (deg.) ........................................................................................................................................ 360
Vertical Movement (in.)....................................................................................................................... 6.52
Horizontal Movement (in.)..................................................................................................................... 9.8
Maximum Height of Rollers Parallel to Tabletop (in.)................................................................................ 6
Approximate Net Weight (lbs.) ............................................................................................................... 71
Approximate Shipping Weight (lbs.) ....................................................................................................... 75
The above specifications were current at the time this manual was published, but because of our policy of
continuous improvement, WMH Tool Group reserves the right to change specifications at any time and
without prior notice, without incurring obligations.