Filter
Top Products
17
7. Shut off drill press and disconnect from
power.
8. Remove lower belt in same manner as upper
belt.
9. Use reverse procedure to install new belts.
11.2 Lamp replacement
Referring to Figure 28:
1. To replace a lamp, use a thumbnail or flat
blade screwdriver to gently pry down the lamp
assembly (A) until it releases from the seat, as
shown.
2. Unscrew front plate (B) from head, pull out the
plate, and disconnect the lamp wires from the
electrical board. Remove old lamp assembly.
3. Install new lamp assembly and push it firmly
into the seat. Connect the wires and reinstall
front plate.
Figure 28