Filter
Top Products
4
Preparation
24'2#4#6+10"
2. Use a screwdriver to loosen the
larger screw at the top of the
soldering iron and fully insert the
supplied soldering tip into it. Then
tighten the screw securely.
.
..
.
±
±±
±
3. Insert the soldering iron’s plug into
the 5-pole socket on the soldering
station. The plug only fits one way.
Do not force it.
°
°°
°
C
↔
↔↔
↔
°
°°
°
F
Bottom View
1. Use a small pointed
object, such as a
straightened paper
clip, to set
°
°°
°
C
↔
↔↔
↔
°
°°
°
F
at the bottom of the
station to Celsius or
Fahrenheit.
Sponge5-Pole Socket
.
"%#76+10"
.
Never operate the
soldering iron without
the soldering tip. This
can damage the
heating element and
temperature sensor.
±
"016'"
±
"
The smaller screw is
used to fasten the
heating element to the
iron, and the larger one
is used to fix the
soldering tip in the
heating element.
64-2185rc.fm Page 4 Monday, August 26, 2002 8:28 AM