Filter
Top Products
5
Preparation
4. Insert the soldering iron into the
spring support in the soldering iron
stand.
5. Soak the supplied sponge with
water and then put it in the tray on
the stand.
6. Set
–/O
at the side of the station
to
O
before plugging it into an AC
outlet.
&'6#%*+0)"6*'"56#0&
1. Gently pull the bottom of the stand
away from the station until the tab
on the bottom of the stand clears
the station.
2. Slide the stand up and off the
station.
GROUND
To prevent ESD
(electrostatic
discharge) damage
to static sensitive
devices, connect a
ground wire (not
supplied) to the
GROUND
jack on
the back of the
station using a
banana plug.
64-2185rc.fm Page 5 Monday, August 26, 2002 8:28 AM