Filter
Top Products
9
Replacing the Fuse
7. Clean and tin the soldering iron.
Then put the soldering iron back
into the stand.
4'2.#%+0)"6*'"
(75'
1. Disconnect the soldering iron from
AC power.
2. Use a screwdriver to push and
rotate the fuse holder cap on the
back of the station
counterclockwise.
3. Remove the old fuse and replace it
with a new one (1.6A slow-blow/
250V).
.
..
.
4. Replace the cap and rotate it
clockwise.
5. Plug the soldering iron back into
AC power.
.
"%#76+10"
.
Do not use a fuse with
ratings other than those
specified here. Doing so
might damage your
soldering station.
64-2185rc.fm Page 9 Monday, August 26, 2002 8:28 AM