Filter
Top Products
42
Aux Audio
„Aux Audio‟ is to control the AUX In and AUX Out
connections on the base.
1. Aux In ON/OFF and Aux Out ON/OFF allow
enabling / disabling the Aux connectors of
the FLX phone.
2. Aux In Level allows changing the level of
the Aux In signal.
3. Aux Out Level allows changing the level of
the Aux Out signal.
4. Aux Out – MIC / LINE allows setting the
level of the Aux Out connectors to either
Mic level or Line level.
AEC
„AEC‟ allows controlling the Acoustic Echo
Cancellation Level of the different Microphone types
(Omni, Directional, or Lapel).
RF Power
The RF Power level setting allows to change the signal
strength of the base station and microphones. Factory default
is setting 4. Levels 3 or 2 can be selected to reduce the
signal strength. Lower signal strength reduces the maximum
distance between base station and any of the wireless
devices. A lower setting might be desirable in environments
where a lot of DECT traffic is encountered.
1. Browse to the RF Power menu: Setup
Advanced Setup RF Power.
2. The user can adjust the RF Power from 2 to 4.