Filter
Top Products
Page 8
FEATURES
ELECTRICAL CONNECTION
Your router has a precision built electric motor. It should be
connected to a power supply that is 120 volts, 60 Hz, AC
only (normal household current). Do not operate this tool
on direct current (DC). A substantial voltage drop will cause
a loss of power and the motor will overheat. If your tool does
not operate when plugged into an outlet, double-check the
power supply.
APPLICATIONS
(Use only for the purposes listed below)
■ Routing grooves, shaping edges, freehand designs, etc.
in wood.
■ Chamfering, rabbeting, dadoing, and dovetailing in wood
are additional applications.
■ Routing edges on laminates.
PLUNGE LOCK AND RELEASE FEATURE
See Figure 2.
Your router has a plunge lock and release lever that allows free plunging. Releasing the lever allows smooth, precise plunging
action. Locking the lever secures the cutter once the desired depth of cut has been determined.
A
B
C
D
E
F
REAR VIEW OF ROUTER
Fig. 2
LOCK-ON
BUTTON
SWITCH
TRIGGER
PLUNGE LOCK AND
RELEASE LEVER
SPINDLE
LOCK BUTTON
VARIABLE SPEED
CONTROL SELECTOR
KNOB
SCREW
ROUTER
BASE
SUBBASE
MOTOR
HOUSING
HANDLE
DEPTH
CONTROL KNOB
POWER CORD
COLLET NUT
8 mm
SCREW HOLES
POWER
HANDLE