Filter
Top Products
Page 9
FEATURES
Sawdust Blower
Keeps the line of the cut on the workpiece clean for more
accurate scroll cuts. For best results, always direct air flow
at the blade and the workpiece.
Sawdust Exhaust
This feature will allow you to attach any 1-1/4 in. (32 mm)
vacuum hose for easy sawdust collection.
Saw Table with Throat Plate
Your scroll saw has an aluminum saw table with tilt control for
maximum accuracy. The throat plate, inserted in the saw
table, allows for blade clearance.
Switch and Switch Key
Your scroll saw has an easy access power switch. To lock in
the OFF position, remove the yellow switch key. Place the
key in a location inaccessible to children and others not
qualified to use the tool.
Table Lock Knob
Allows you to tilt the table and lock it at the desired angle up
to 45°.
Variable Speed Knob
Turn the knob to adjust the speed from the high speed of
approximately 1600 SPM (strokes per minute) to the low
speed of approximately 400 SPM.
Fig. 4
BLADE
TENSION KNOB
DROP
FOOT
SAW BLADE
BLADE CLAMP
SCREWS
SAW
TABLE
DROP FOOT
LOCK KNOB
BEVEL SCALE
MOTOR
SWITCH AND
SWITCH KEY
THROAT
PLATE
SAWDUST
BLOWER
0
30
15
VARIABLE
SPEED KNOB
SAWDUST
EXHAUST
TABLE
LOCK KNOB
KNOW YOUR SCROLL SAW
Before attempting to use your saw, familiarize yourself with
all the operating features and safety requirements of your
Ryobi scroll saw.
See Figure 4.
This versatile, variable speed scroll saw is great for making
toys, puzzles, games, artwork, and jewelry. It is a handy do-
it-yourself tool. It cuts wood, wood composition products,
plastic, and other fibrous material up to 2 in. (51 mm) thick.
It also cuts nonferrous metals (aluminum, brass, copper).
Bevel Scale
The bevel scale and indicator show you the degree the saw
table is tilted.
Blade Clamp Screws
Blade clamp screws are used when changing saw blades.
Blade Tension Knob
Loosen or tighten the blade tension by turning the blade
tension knob.
Drop Foot
This foot should always be lowered until it just rests on top of
the workpiece to prevent the workpiece from lifting, yet not so
much that the workpiece drags.
Drop Foot Lock Knob
Allows you to raise or lower the drop foot and lock it in place.