Filter
Top Products
assembly
INSTALLING SANDING DiSC AND GUARD
1. Locate sanding disc and pee backing from disc.
Align perimeter of discwith I_late and press disc firmly
into position all the way around.
2. Locate disc guard and two pan head screws, M4,2 x
1.4-12 from loose Darts bag.
3. Position disc guard against lower 1/3 of disc aligning
holes as shown.
4. Using phillips type screwdriver, fasten the pan head
screws securely applying slight pressure to thread
the holes.
SANDING
DiSC
SANDING
PLATE
INSTALLING WORK SUPPORT
1. Locate work support and hex screw M6 x 1,0-14,
washer and Iockwasher.
2. Hold work support into position and fasten as shown.
Do not overtighten.
LOCKWASHER =LATWASHER
HEX SCREW WORK SUPPORT
HEX SCREW
WORK SUPPOR]
INSTALLING TABLE ASSEMBLY
1. Locate table support and (3) hex head screws, M6 x
1.0-14. washer and Iockwashers among loose parts.
2. Position table support against table, aligning holes as
shown.
3. Fasten table support to table as shown.
J
HEX HEAD SCREW (3
TABLE
SUPPORT
_ WASHER 13)
LOCKWASHER (3)