Filter
Top Products
- 19 - Woodstock Intl., Inc. D2796
OPERATIONS
UNEVEN FIT
If the side piece fits either excessively or protrudes at
one edge and not the other, the fit is uneven. See Figure
29.
Causes: One or more of the following.
1. The drawer edges are not parallel to the front of the
template. See Figure 30.
2. The fence is not parallel to the front of the template.
See Figure 31.
3. The template is not parallel to the drawer edges. See
Figure 32.
Remedy: Make sure that the drawer edges, fence, and
template are all parallel to one another.
Figure 30. The wood stock must be clamped parallel to one
another and tight against the side stops.
Figure 29 shows uneven fit.
Figure 31. Adjust the fence so that it is parallel to the front
edge of the template fingers.
Figure 32. Adjust the template so that it is parallel to the
front edge of the drawer pieces.