Filter
Top Products
- 3 - Woodstock Intl., Inc. D2796
SAFETY
1. KNOW YOUR POWER TOOL. Read the
owner’s manual carefully. Learn the tool’s appli-
cations and limitations, as well as its particular
hazards.
2. KEEP ALL GUARDS IN PLACE and in work-
ing order.
3. GROUND ALL TOOLS. If an adapter is used to
accommodate a two-prong receptacle, the adapter
plug must be attached to a known ground. Never
remove the grounding prong.
4. REMOVE ADJUSTING KEYS AND
WRENCHES. Make it a habit to check that keys
and adjusting wrenches are removed from the
machine before turning it on.
5. KEEP WORK AREA CLEAN. Cluttered areas
and benches invite accidents.
6. AVOID DANGEROUS ENVIRONMENTS. Do
not use power tools in damp or wet locations or
expose them to rain. Keep your work area well
lighted.
7. KEEP CHILDREN AND VISITORS AWAY.
All children and visitors should be kept a safe dis-
tance away from your work area.
8. MAKE WORKSHOP CHILD-PROOF with
padlocks, master switches, or by removing starter
keys.
9. DO NOT FORCE TOOL. Tools work better and
more safely when they are allowed to work at their
own speed.
10. WEAR PROPER APPAREL. Do not wear loose
clothing, gloves, neckties, or jewelry that might
get caught in moving parts. Non-slip footwear
should be worn. Wear a hat or other protective
head wear if your hair is long.
11. NEVER STAND OR LEAN ON TOOL.
12. USE SAFETY GLASSES AND EAR PRO-
TECTION. Also use a DUST MASK if the cut-
ting operation is dusty.
13. DO NOT OVERREACH. Keep proper footing
and balance at all times.
14. MAINTAIN TOOLS IN TOP CONDITION.
Keep tools sharp and clean for best and safest per-
formance. Follow instructions for lubricating and
changing accessories.
15. DISCONNECT TOOLS FROM POWER
before servicing and when changing accessories,
such as blades, bits, and cutters.
16. AVOID ACCIDENTAL STARTING. Make
sure the switch is in the “OFF” position before
plugging in the cord.
17. CHECK DAMAGED PARTS. Do not operate
the machine until you are certain it is in perfect
running condition.
18. NEVER LEAVE THE TOOL RUNNING
UNATTENDED - TURN POWER OFF. Do not
leave the tool until it comes to a full stop.
19. DO NOT OPERATE THE TOOL IF USING
DRUGS, ALCOHOL, OR MEDICATION.
20. DO NOT WORK IN HASTE or operate machine
if you are mentally or physically fatigued.
21. IF THERE IS SOMETHING YOU DO NOT
KNOW OR UNDERSTAND, DO NOT OPER-
ATE MACHINE! Ask for help first. Confusion
can be dangerous.
22. BAD HABITS ARE DANGEROUS. Review all
safety procedures often.
23. IF AT ANY TIME YOU ARE EXPERIENC-
ING DIFFICULTIES performing the intended
operation, stop using the machine! Then contact
our service department or ask a qualified expert
how the operation should be performed.
SAFETY RULES FOR ALL TOOLS