Filter
Top Products
- 4 - Woodstock Intl., Inc. D2796
ASSEMBLY
Remove the items packed in the carton. It may be a
good idea to save the carton and packing material in
case they might be needed in the future. Upon removal
of all items from the package, you should have:
1. Dovetail Jig
2. Hand Levers (2)
3. Manual
Figure 1 shows the dovetail jig with handles.
BENCH MOUNTING
1. Place the jig on your bench top so the front lap
rests against the front of the bench top.
2. Locate the mounting holes in the rear and front of
the jig. Scribe the hole locations and determine
whether to use nuts and bolts, or screws. Drill the
appropriate size holes.
HAND LEVERS
The jig is shipped fully assembled except for the two
hand levers.
1. Screw the threaded end of each hand lever into the
clamping rods located on the top and front of the
dovetail jig as shown in Figure 1. Tighten until
secure.
3. Secure the jig to your bench top. See Figure 2.
Hint: If you do not wish to permanently devote bench
space to the dovetail jig, mount the jig to a piece of
3
/4"
plywood that can be clamped to your bench top.
Dovetail Jig
Hand Lever
Hand Lever
Figure 2 Jig secured to a benchtop.
UNPACKING
ASSEMBLY
NOTICE
Save all containers and packing materials until
you are satisfied that your Model D2796 has
arrived in good condition. Freight company
adjusters will want to inspect those materials in
the event that a freight claim must be made.
Wear safety glasses dur-
ing the entire assembly
process. Failure to com-
ply may result in serious
personal injury.
Keep loose clothing
rolled up and out of the
way of machinery and
keep hair pulled back.
Mounting Screws