Filter
Top Products
-16-
D('(*Fne\ijDXelXcD]^%J`eZ\-&'0
J<KLG
8lkfdXk`ZF==
8[aljkd\ek
After you have removed the shipping strap and have
adjusted the headstock stop bolt, you must adjust the
OFF button lever stop bolt, so the bandsaw shuts OFF
automatically when a cut is complete.
Kfj\kk_\X[aljkk_\F==Ylkkfe#[fk_\j\jk\gj1
(% With the headstock in the complete down position,
loosen the 12mm stop bolt and jam nut shown in
=`^li\(,.
)% Push down on the OFF button lever so the button is
completely depressed.
*% While keeping the lever depressed, use your
fingertips to turn the stop bolt until the head just
touches the lever.
4. Back off the stop bolt
1
⁄3 turn and tighten the jam
nut.
=`^li\(,% Automatic OFF components.
Stop Bolt
& Jam Nut
OFF Button
Lever