Filter
Top Products
-17-
D('(*Fne\ijDXelXcD]^%J`eZ\-&'0
J<KLG
Glcc\p:fm\i
=`^li\(-% Positioning the pulley cover.
When opened, the pulley cover gives you access to change
the pulley ratio so the bandsaw can cut at one of three
speeds.
<EK8E>C<D<EK?8Q8I;
D8B< JLI< k_\ YXe[jXn `j
legcl^^\[ Y\]fi\ gifZ\\[`e^
Fk_\in`j\# j\m\i\ `ealip dXp
fZZli%
Kf`ejkXcck_\glcc\pZfm\i#[fk_\j\jk\gj1
(% Position and rotate the pulley cover into place, as
shown in =`^li\(-.
)% Install the two
1
⁄4-20 x
1
⁄2" hex bolts and washers to
secure the pulley cover.
*% Loosen the belt tension knob enough to install the
belt on the appropriate pulley that will give the
required blade speed. Refer to 9cX[\Jg\\[ on GX^\
)* for blade speed selections.
+% Adjust the belt tension knob (=`^li\(.), so the
belt has approximately
1
⁄4" deflection when pressed
in between the pulleys, then close and secure the
cover.
=`^li\(.% Belt tension knob.
Belt Tension
Knob