Filter
Top Products
Shop Fox
®
-5-
SECTION II: ASSEMBLY
Figure 1. Lock knob installation.
B. Clamping Mechanism
To attach the horizontal clamping mechanism to the
Shop Fox
®
:
1. Press the rubber clamping pad onto the head of
the 2" carriage bolt.
2. Thread the carriage bolt into the toggle clamp.
Figure 2.
3. Tighten the lock nut against the toggle clamp
shoulder. Adjustment is made by loosening the
lock nut and turning the carriage bolt in or out of
the toggle clamp and then re-tightening the lock
nut.
A. Lock Knobs
To secure the Shop Fox
®
assembly to the base plate:
1. Thread each of two (2) lock knobs into the
lock knob brackets mounted on the base plate.
Figure 1.
2. Tighten sufficiently to hold the Shop Fox
®
to the
base plate.
Figure 2. Threading the clamping pad into the
toggle clamp.
Rubber Pad
Lock Nut