Woodstock W1669 Cordless Drill User Manual


  Open as PDF
of 44
 
Column ring in the correct position.
 Seat the rack tapered-point into the bevel
that is cut into the column support tube
(see).

Slide the column ring onto the column with
the inside bevel in the down position until
the rack tapered-point seats into the bevel
(see).

Position the column ring so the table
bracketandrackcanjustrotatearound
the column without binding.
 Carefully, snug the set screw to hold the
columnringinplace.Over-tighteningthe
column ring will distort or split the column
ring.
Column Ring
Bevel
Bevel and rack seated correctly.
Tapered Rack
Point and
Column Support
Tube Bevel.
Set
Screw

-11-
 previous next