Filter
Top Products
-15-
W1677/W1711 10" Table Saw
SETUP
Shop Fox Classic Fence
Inventory
Depending on which model you purchased, your saw will
come with standard length rails or with long rails. The
Shop Fox Classic fence includes extra hardware for mount
-
ing it to other brands of table saws.
The inventory list below and Figure
s 14 & 15 show only
the hardware needed to mount the fence to your saw. To
avoid confusion, we suggest removing any items not listed
here from your immediate work area.
Inventory Needed for Your Saw
Standard Rails (Figure 14): Qty
A. Fence Assembly ............................................1
B. Front Rail 46
1
⁄2" ...........................................1
C. Back Rail 46
1
⁄2" ............................................1
D. Front Rail Rectangular Tube 54" ........................1
E. Scale .........................................................1
Long Rails (Figure 15): Qty
A. Front Rail Rectangular Tube 84" ........................1
B. Extension Table ............................................1
C. Legs ..........................................................2
D. Feet ..........................................................2
E. Front Rail 72" ..............................................1
F. Back Rail 72" ...............................................1
G. Fence Assembly ............................................1
H. Leg Braces ..................................................2
I. Scale .........................................................1
Figure 14. Classic fence inventory for
standard rails.
A
B
C
D
E
Figure 15. Classic fence inventory for long
rails.
A
B
C
D
E
F
G
H
I
Common Rail/Table Mounting Hardware:
• Hex Bolts
3
⁄8-16 x 1" (Rail/Table) ........... 4
• Flat Washers
3
⁄8" (Rail/Table) ............... 4
• Hex Bolts
1
⁄4-20 x
3
⁄4" (Rail/Tube) .......... 4
• Flat Washers
1
⁄4" (Rail/Tube) ................ 4
Additional Hardware Only for Long Rail Setup:
• Hex Bolts
1
⁄4-20 x
3
⁄4" (Rail/Tube) .......... 3
• Flat Washers
1
⁄4" (Rail/Tube) ................ 3
• Hex Bolts
3
⁄8"-16 x 1
3
⁄4" (Rail/Ext Table) .. 8
• Flat Washers
3
⁄8" (Rail/Ext Table) .........16
• Hex Nuts
3
⁄8"-16 (Rail/Ext Table) ........... 8
• Hex Nuts
1
⁄2" (Feet Jam Nuts) ............... 2
• Wood Screws
1
⁄4" x
3
⁄4" (Brace/Ext Table) 2
• Fender Washers
1
⁄4" (Brace/Ext Table) .... 2
• Hex Bolts
3
⁄8"-16 x
3
⁄4" (Brace/Leg) ........ 2
• Flat Washers
3
⁄8" (Brace/Leg) ............... 2
• Flat Washers
3
⁄8" (Spacers for Brace/Leg) . 8
• Wood Screws #8 x
3
⁄4" (Leg/Ext Table) ...12