Filter
Top Products
ASSEMBLY
-11-
Clean Up
The exposed, unpainted surfaces of the machine
have been coated with an oil to prevent rust
during shipment. This oil needs to be removed
before operation. To remove the oil, we recom-
mend using a solvent based degreaser. Avoid
using any chlorine based solutions because they
will damage the painted surfaces. Always follow
the instruction of the product being used.
Never use flammables
such as gas or other petro-
leum-based solvents to
clean your machine.
These products have low
flash points and present
the risk of explosion and
severe personal injury!
Never smoke while using
any cleaning solvents.
Smoking may cause explo-
sion or risk of fire when
exposed to these products!
Most solvents used to
clean machinery are
toxic when inhaled or
ingested. When using
these products, work in
a well ventilated area
and keep away from any
potential ignition
sources (pilot lights).
Always dispose of any
waste rags in a sealed
container to make sure
they do not cause fire or
environmental hazards.