Filter
Top Products
OPERATIONS
-20-
Once assembly is complete and adjustments
have been made, the machine is ready for a test
run. The purpose of a test run is to identify any
unusual noises and vibrations, as well as to con-
firm the machine is performing as intended.
1. Turn the machine on by pressing the START
button on the power switch. Be sure to have
your finger poised to hit the STOP button.
2. Once the machine is running, listen for any
unusual noises. The machine should run
smoothly with little or no vibrations.
3. If there are any unusual noises or vibrations,
shut the machine OFF immediately. The
machine should not be run any further until
the problems are corrected.
4. Unplug the machine and investigate the
source of the noise or vibration. Do not make
any adjustments to the machine while it is
plugged in.
5. Repeat Steps 1-4 until the machine runs
smoothly.
OPERATIONS
Test Run
It is common for one side of the dust collector to
fill with dust at a faster rate than the other. If
this happens, simply adjust the metal flap on
the inside of the outlet as shown in Figure 24.
Pushing the flap to one side or the other diverts
the airflow; thus, equalizing the rate the bags
fill with dust.
Adjusting Outlet
It is absolutely critical that
you read and understand
this entire instruction
manual before performing
any operations with your
machine. Serious personal
injury may occur if safety
and operational informa-
tion is not understood and
followed. Do not risk your
safety by not reading!
INSTRUCTION MANUAL
MODEL W1687
3 HP DUST COLLECTOR
Phone: 1-360-734-3482 • On-Line Technical Support: tech-support@woodstockint.com
COPYRIGHT © JUNE, 2002 BY WOODSTOCK INTERNATIONAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT
THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC.
Printed in Taiwan
Keep loose clothing
rolled up and out of the
way of machinery and
keep hair pulled back.
Safety glasses must be
worn to prevent serious
personal injury!
Figure 24. Adjusting the outlet flap to equalize
the rate the collection bags fill with dust.