Filter
Top Products
-25-
Model W1706 (Mfg. Since 8/10)
SETUP
7. Loosen the cap screws behind the guide bearings
(see Figure 31), then open the upper wheel cover.
8. Rotate the upper wheel with one hand, and use the
hex wrench to rotate the eccentric guide bearings
until they just begin to rotate with the blade (see
Figure 33). The guides should just lightly touch the
blade.
9. When you are satisfied with blade guide bearing
positions, re-tighten the cap screws behind them to
secure the settings.
Figure 33. Rotating the blade guide
bearings toward the blade.