Filter
Top Products
-8-
W1764 Power Feeder
Always use appropriate machine guards.
Make sure all cutting tools are rotating at the operating speed before feeding the
workpiece.
DO NOT overload the cutting tool by feeding too quickly. The cutting tool will per-
form better and be safer working at the rate for which it was designed.
Keep hands away from rotating parts on the feeder and the cutting tool. Do not allow
hands or clothing to be pinched between the rollers and workpiece.
DO NOT feed long workpieces without providing adequate support at the
outfeed end of the table.
Always stop the feeder before stopping the cutting tool.
Disconnect the feeder from its power source before cleaning, repairing, or making
adjustments.
If at any time you are experiencing difficulties performing the intend-
ed operation, stop using the machine! Contact Tech Support at (360) 734-3482.
This manual only covers the power feeder. It is not a replacement for the manual
that came with the machine on which the power feeder is mounted. Make sure to read that manual
also for correct operation and safety precautions.