Filter
Top Products
-18-
W1764 Power Feeder
Since all bearings are sealed and permanently lubricated,
simply leave them alone until they need to be replaced.
Do not lubricate them. However, periodically oil the lock
lever and T-handle threads to ensure free operation and
wipe down the adjustment arm with a thin film of oil as
required to prevent surface rust.
Frequently blow-off sawdust with compressed air. This is
especially important for the internal working parts and
motor. Dust build-up around the motor is a sure way to
decrease its life span. If the wheels become loaded up
with pitch, oil, or other residues, wipe them clean using
a clean rag and a mild solvent. Avoid touching the plastic
or paint with mineral spirits or you may damage the sur-
faces.
Regular periodic maintenance on your machine will
ensure its optimum performance. Make a habit of
inspecting your machine each time you use it.
Loose mounting bolts.
Worn switch.
Worn or damaged cords and plugs.
Damaged wheel rubber.
Any other condition that could hamper the safe
operation of this machine.