Filter
Top Products
-10-
W1764 Power Feeder
The following is a description of the main components
shipped with the Model W1764. Lay the components out
to inventory them.
If you can't find an item on this list, check the
mounting location on the machine or examine the pack-
aging materials carefully. Occasionally we pre-install cer-
tain components for safer shipping.
Base ..........................................................1
Arm Bracket ................................................1
Power Feeder Unit ........................................1
Arm ..........................................................1
Base Mounting Template .................................1
Elbow Clamp Assembly ...................................1
Ball Joint Assembly ........................................1
Hardware Bag .................................1
—Cap Screw M10-1.5 x 25mm (Elbow Clamp) .........1
—Hex Bolt M10-1.5 x 50mm (Elbow Clamp) ...........3
—Lock Lever (Arm Bracket Clamp) .....................1
—Hex Nut M8-1.25mm (Arm Bracket Clamp) ..........1
—Flat Washer 8mm (Arm Bracket Clamp) ............1
—T-Handle and Pivot Bar (Ball Joint Assembly) .......1
—Hex Bolt M10-1.5 x 35mm (Base) .....................4
—Lock Washer 10mm (Base) .............................8
—Hex Nut M10-1.5mm (Base) ............................7
This machine has been carefully packaged for safe trans-
portation. If you notice the machine has been damaged
during shipping, please contact your authorized Shop Fox
dealer immediately.
Box inventory.
Hardware inventory.
C
F
A
E
B
D
G
H
H