Sony XDP-MU110 Work Light User Manual


 
10
Adjusting the input volume
from the iPod/iPhone
Press the ALO button.
Adjust the playback volume level of an
iPod/iPhone to the optimum level.
Press the ALO button repeatedly to switch
between ON and OFF. The default setting is
ON. This function is available only when an
iPod/iPhone is selected as the source.
• ON: A high-pitched beep
• OFF: A low-pitched beep
Setting up the Cradle
Precautions
Install the cradle on a dashboard properly so
that the unit will not interfere with normal
driving.
Follow the instructions on this manual about
dealing with the suction cup to secure the
cradle on a dashboard. If you fail to do so,
the adhesive strength of the suction cup may
decrease, and the cradle may fall down.
If the cradle becomes detached, a traffic
accident may result. To prevent this, use the
supplied strap.
Keep the cradle out of the reach of children.
Should a small part of the cradle be
swallowed, immediately consult a doctor.
Remove the cradle from the dashboard and
keep it out of direct sunlight after use.
Leaving it on a dashboard or in a car where it
will be exposed to high temperature may
cause malfunction, and it may also damage
the dashboard.
An iPod/iPhone may not be charged if you
put it on the cradle when the temperature in
the car is extremely high/low.
Be careful not to splash water on the cradle.
It may cause a malfunction.
To disconnect the cradle cord, pull it out by
its connector, not the cord.
Parts List
Cradle