Filter
Top Products
5
The System Components
This section contains explanations on the location of controls and their basic operations.
DSP master unit
Sound setting switches page 8
Set each switch according to your car
type/interior.
SOURCE indicator
You can check the status of the DSP
master unit.
INPUT SELECT switch
Select either 2-channel or 4-channel
sound from the car audio unit. Select
“2ch” if you connect only the front car
speakers to the DSP master unit, with
High Level Input connection.
RESET
Press to reset the DSP master unit
settings.
Note
• Avoid touching the top of the DSP master unit
during use, as it becomes hot over time.
23 41
Indicator Status
Turns blue. A car audio unit is selected as
the source.
Turns red. An iPod/iPhone is selected as
the source.
Flashes blue. Diagnostic error. See
“Troubleshooting” (page 20).
Flashes red. Overload error when an
iPod/iPhone is selected as the
source. See
“Troubleshooting” (page 20).
Flashes blue
and red
alternately.
Temperature detection is
working. See
“Troubleshooting” (page 20).