Filter
Top Products
For Machines Mfg. Since 8/09 SB1024/SB1025/SB1026
-23-
PREPARATION
Way Covers
1. Remove the five button-head cap screws
shown in Figure 11 from the front of the
saddle and knee, position the pleated way
cover in place, then secure it with the
removed cap screws.
2. Remove the four button-head cap screws
shown in Figure 12 from the column and
the rear of the table, position the rear
way cover in place, then secure it with the
removed cap screws.
Figure 11. Front way cover installed.
Cap Screws
Figure 12. Rear way cover installed.
Cap
Screws