5
Instruction Manual EN
r
r
ƒ,ILQGRXEWGRQRWSOXJLQWKHWRRO8VLQJDSRZHU
source with a voltage less than the nameplate
rating is harmful to the motor.
ƒ7KHWRROPXVWEHXVHGRQO\IRULWVSUHVFULEHG
purpose. Any use other than those mentioned
in this Manual will be considered a case of mis-
use. The user and not the manufacturer shall
be liable for any damage or injury resulting from
such cases of misuse.
ƒ7RXVHWKLVWRROSURSHUO\\RXPXVWREVHUYHWKH
safety regulations, the assembly instructions
and the operating instructions to be found in this
Manual. All persons who use and service the
machine have to be acquainted with this Manu-
DODQGPXVWEHLQIRUPHGDERXWLWVSRWHQWLDOKD]-
ards. Children and frail people must not use this
tool. Children should be supervised at all times
if they are in the area in which the tool is being
used. It is also imperative that you observe the
accident prevention regulations in force in your
area. The same applies for general rules of oc-
cupational health and safety.
ƒ7KHPDQXIDFWXUHUVKDOOQRWEHOLDEOHIRUDQ\
changes made to the tool nor for any damage
resulting from such changes.
(YHQZKHQWKHWRROLVXVHGDVSUHVFULEHGLWLVQRW
possible to eliminate all residual risk factors. The
IROORZLQJKD]DUGVPD\DULVHLQFRQQHFWLRQZLWKWKH
WRRO¶VFRQVWUXFWLRQDQGGHVLJQ
ƒ'DPDJHWRKHDULQJLIHIIHFWLYHKHDULQJSURWHF
-
tion is not worn.
ƒ$OZD\VUHPRYHWKHSOXJIURPWKHPDLQVVRFNHW
before making any adjustments or mainte-
nance, including changing the blades and ad-
justing the depth of cut.
ƒ&RQWDFWZLWKWKHEODGHV
ƒ5HDFKLQJXQGHUWKHEDVHZKLOVWWKHWRROLVUXQ-
ning and making contact with the blade.
ƒ.LFNEDFNRIZRUNSLHFHDQGSDUWVRIZRUNSLHFH
ƒ %ODGHIUDFWXUH
ƒ&DWDSXOWLQJRIIDXOW\SLHFHVIURPWKHEODGH
ƒ63$5.< SRZHU WRROV PXVW QRW EH XVHG RXW-
doors in rainy weather, or in moist environment
DIWHUUDLQRULQFORVHYLFLQLW\ZLWKHDVLO\IODP-
mable liquids and gases. The working place
should be well lit.
V - Know your product
%HIRUHXVLQJWKHSRZHUWRROIDPLOLDUL]H\RXUVHOI
with all the operating features and safety require-
ments. Use the tool and accessories only for the
applications intended. All other applications are
expressly ruled out.
1. On/Off trigger switch
2. Lock-off button
3. Depth adjustment knob
4. Main handle
5. Secondary handle
'XVWFKLSH[WUDFWLRQSRUW
3DUDOOHOIHQFHDWWDFKPHQWNQRE
8. Dust / chip extraction guide switch
5HYHUVLEOHEODGHV
%ODGHEDUUHO
11. Clamping screw
12. Moveable front base
)L[HGUHDUEDVH
14. Parallel fence guide
15. Shavings adaptor tube
6KDYLQJVFROOHFWLRQEDJ
6SDQQHU
18. Spanner storage sleeve
VI - Operation
This model SPARKY power tool is supplied from
single-phase alternating current mains.It is double
LQVXODWHGDFFRUGLQJWR(1,(&DQG
can be connected to grounded or not grounded
sockets. This power tool is radio suppressed
LQFRPSOLDQFHZLWK(1(1
(1(1IRUUDGLRLQWHUIHU-
ence.
PRIORTOINITIALOPERATION
ƒ 0DNHVXUHSRZHUVXSSO\YROWDJHFRUUHVSRQGV
to the value indicated on the name plate with
technical data of the tool.
ƒ0DNHVXUHWKHFRUGDQGWKHSOXJDUHLQRUGHU
If the replacement of the supply cord is neces-
sary, this has to be done by the manufacturer or
KLVDJHQWLQRUGHUWRDYRLGDVDIHW\KD]DUG
REMOVING AND INSTALLING
PLANER BLADES
CAUTION: Always ensure that the tool
is switched off and unplugged from the power
supply before installing or removing blades.
<RXU SODQHU LV ¿WWHG ZLWK UHYHUVLEOH EODGHV
%ODGHVFDQEHUHYHUVHGZKHQEOXQW$IWHUERWK
sides of the blades have been used they should
be discarded.
NOTE.
These blades cannot be re-sharpened.
pages-P282.indd 5 ɝ