Filter
Top Products
TD-8817 ADSL2+ Ethernet/USB Modem Router User Guide
9
Figure 3-2
You can check it following the steps below:
1) Is the connection between your PC and the modem router correct?
The LEDs of LAN port which you link to the device and the LEDs on your PC's adapter should
be lit.
2) Is the TCP/IP configuration for your PC correct?
If the modem router's IP address is 192.168.1.1, your PC's IP address must be within the
range of 192.168.1.2 ~ 192.168.1.254.
3.2 USB Configuration
If you use the USB interface, First, you must install the USB’s driver to the computer. You can
obtain the drivers from the provided CD, or download from our website. (http://www.tp-link.com
)
USB Drive installation procedures
Step 1: Please connect your PC to the modem router through the USB port at first, then insert
the provided CD into your CD-ROM drive. The autorun.exe will automatically run and
click Browse CD to read the files on the CD. Click the file TD-8817>USB Driver and
select the USB driver type according to the operating system of your computer to start
installation.
Step 2: Soon, Figure 3-3 will display after a moment. Click Next to continue.