Filter
Top Products
TD-8817 ADSL2+ Ethernet/USB Modem Router User Guide
37
ation about the Mapping addresses.
Circuit” and Multiple for the “Number of IPs”. Then select the tab IP
Mapping is
only available for VCs with Multiple IPs.
6.
nding fields.
button to delete the entry.
ch is made just now.
4.4.4 QoS
nced Setup→QoS”, you can configure the QoS in the next screen. QoS helps to
Address Mapping List: This displays the inform
To add a mapping rule:
Step 1: Select the “Virtual
Address Mapping (shown in Figure 4-25).
Note:
IP Address
Step 2: Select the Rule index for the rule as shown in Figure 4-2
Step 3: Select the rule type you w
ant from the drop-down list.
Step 4: Enter the local and public IP addresses in the correspo
Step 5: After that, click SAVE to make the entry take effect.
Other operations for the entries are as follows:
Enter the index of assigned entry, click the DELETE
Click the BACK button to return to the previous screen.
Click the CANCEL button to cancel the configuration whi
Choose “Ad
va
prioritize data as it enters your router. By attaching special identification marks or headers to
incoming packets, QoS determines which queue the packets enter, based on priority. This is
useful when you want to give certain types of data higher priority, such as giving voice data
packets higher priority than Web data packets. This option will provide better service of selected
network traffic over various technologies.