Filter
Top Products
TD-8817 ADSL2+ Ethernet/USB Modem Router User Guide
36
Other operations for the entries are as follows:
Enter the index of assigned entry, click the DELETE button to delete the entry.
Click the BACK button to return to the previous screen.
Click the CANCEL button to cancel the configuration which is made just now.
4.4.3.3. IP Address Mapping
Choose “Ad
vanced Setup→NAT”, select Multiple in Number of IPs. Click IP Address Mapping,
then you can configure the Address Mapping Rule in Figure 4-26. The IP Address Mapping is for
those VCs th
at configured with multiple IPs. The IP Address Mapping rule is per-VC based (only
for Multiple IPs' VCs).
Figure 4-
25
Figure 4-26
Rule Index: Select the Address Mapp x for this VC. You can specify 8 rules in
There are four types, one-to-one, Many-to-One, Many-to-Many Overload and
he local IP Address you plan to mapped to. Local Start IP is the
blic Start IP is the
ing Rule inde
maximum.
Rule Type:
Many-to-Many No-overload.
Local Start & End IP: Enter t
starting local IP address and Local End IP is the ending local IP address. If the rule is for all
local IPs, then the Start IP is 0.0.0.0 and the End IP is 255.255.255.255.
Public Start & End IP: Enter the public IP Address you want to do NAT. Pu
starting public IP address and Public End IP is the ending public IP address. If you have a
dynamic IP, enter 0.0.0.0 as the Public Start IP.