Filter
Top Products
3
Feature Identification
Identify the premium features on your specific model and quickly locate instructions on how to maximize their use.
Configuration DIP Switches: optimize Inverter/Charger
operation depending on your application. See Configuration
Section for setting instructions.
Operating Mode Rocker Switch: controls Inverter/Charger
operation.The “AUTO/REMOTE” setting ensures your
equipment receives constant, uninterrupted AC power. It also
enables the Inverter/Charger to be remotely monitored and
controlled with an optional remote module (Tripp Lite model
APSRM4, sold separately). The “CHARGE ONLY” setting
allows your batteries to return to full charge faster by turning the
inverter off, which halts battery discharging. See Operation
Section for setting instructions.
Operation Indicator Lights: intuitive “traffic light” signals
show whether the Inverter/Charger is operating from AC line
power or DC battery power. It also warns you if the connected
equipment load is too high. See Operation Section for
instructions on reading indicator lights.
Battery Indicator Lights: intuitive “traffic light” signals show
approximate charge level of your battery. See Operation Section
for instructions on reading indicator lights.
DC Power Terminals: connect to your battery terminals. See
Battery Connection Section for connection instructions.
Hardwire AC Input/Output Terminal Strip (Access Panel):
securely connects the Inverter/Charger to facility or vehicle
electrical system. See Input/Output Connection Section for
connection instructions.
Knockouts for AC Input/Output Conduits
Remote Control Module Connector: allows remote monitoring
and control with an optional module (Tripp Lite model
APSRM4, sold separately). See remote module owner’s
manual for connection instructions.
Battery Charge Conserver (Load Sense) Control: conserves
battery power by setting the low-load level at which the
Inverter/Charger’s inverter automatically shuts off. See
Configuration Section for setting instructions.
Main Ground Lug: properly grounds the Inverter/Charger to
earth ground or to vehicle or boat grounding system. See Battery
Connection Section for connection instructions.
Thermostatically-Controlled Cooling Fans: quiet, efficient
fans regulate internal temperature and prolong equipment
service life. Fans run intermittently depending on temperature
and load.
Remote Generator Start Connector: automatically cycles
generator based on battery voltage. Use with user-supplied
cable. See Configuration Section for more information.
Remote Battery Temperature Sensing Connector: prolongs
battery life by adjusting charge based on battery temperature.
Use with cable (included on select models). See Configuration
Section for more information.
1
2
3
4
5
6
7
8
9
10
11
12
13
1
2
4 3
5
9
10
11
13
8
12
6
7
On Side,
Not Shown